Ecumaster forum

Hello.
In 2012 I have mounted the engine of Foat Punto 1.2 16v mk1 (85cv) engine Avex gearbox on my Seicento Abarth.
Now I run with new engine based from Fiat Grande Punto 1.4 16v 95cv but already with the wiring of Punto.

I have purchased the DET3 but did now how to plug it on the wire.
No configuration helping on the website.

Is it possible to help me please ?
The MAP wires seems to be the same as original Seicento wiring but the 12v and ground not. And the TPS too, I'm lost.

Thanks for the helping.
Kind regards.
Grib from France.
Many thanks.

Salut grib j ai le det 3 aussi Je peux t aider pour le branchement MP sur le forum Manulancia
Je suis en panne comme tu le sais alors j ai regarder le câblage
J ai un iaw 8f proche du tiens p

Hello Manu,

I saw your topic but mine is for 16v, not 8v.

My ECU is IAW 18FD.5Z
PUNTO 1.2 16v ECE FASE 2

I have found my answers searching on the wiring table of each engine I have and concluse the +12V is pin 23 instead of 26, but others are the same.
I will Check that soon.

Grib viens on en parle sur le forum seicento France

Not understand....

Also, my DET3 is ready to tune without fuel implant for the moment.
;everything is the same as Seicento, just the power +12v is the 35 pin from the ECU (orange wire)