ECUMASTER products based projects
-
pazza - Posts:4
- Joined:Wed Dec 09, 2015 2:56 pm
BMW e30 m50 2.5 nv
Post
by pazza » Wed Dec 09, 2015 3:15 pm
Hi people,
Just joined the Emu master ecu club.
I am having the ecu fitted to my e30 which has had a m50 nv swap.
Sadly I`m not that good on the computer side of things as I got a workshop set`n it up for me.
here are a few photos of the car.
Thanks
Will post up more photos soon
-
pazza - Posts:4
- Joined:Wed Dec 09, 2015 2:56 pm
Post
by pazza » Thu Dec 10, 2015 4:16 am
Question people, does anyone know anyone who has tuned the non-vanos m50?
This car was run'n a 402 dme.
-
derOJ - Posts:72
- Joined:Mon Mar 16, 2015 6:30 pm
Post
by derOJ » Thu Dec 10, 2015 10:39 am
I built my M50 nv with turbo...
by the way....your picture shows motor with single vanos
-
pazza - Posts:4
- Joined:Wed Dec 09, 2015 2:56 pm
Post
by pazza » Thu Dec 10, 2015 12:09 pm
Yes your right. Its a vanos head on a non-vanos engine. The guts of the vanos have been removed. I didnt build the car but from my info I got ( from the previous owner ) was they fiited us- spec s50 cams but they didnt dial them in right and one of the cams snapped!!
All the mechanic had was a vanos head so they fitted that.
Tell me more about your setup, please.
-
derOJ - Posts:72
- Joined:Mon Mar 16, 2015 6:30 pm
Post
by derOJ » Thu Jan 07, 2016 6:49 pm
Do you need specific info?
M50B25 nv with HX35 turbo T3 twin scroll
selfmade exhaust manifold "6 in 2 in 1", but no twin scroll yet
2,5 inch from downpipe to end
E36 M3 6 drive Gearbox with 2.65 diff 25%
E36 M3 flywheel and E36 M3 clutch
