Ecumaster forum

Since there doesn't seem to be any actual support for ECUMaster products, is the any chance I can get firmware for the EGT2CAN that at least calibrates and displays in Fahrenheit instead of Celsius...
As a mater of fact ANY files, software or documentation on the module would at least give me a chance at getting it to work with my ECU.....
I was told on the phone before purchasing this controller that it could be used with most ECUs......

You can do the math yourself.

°F= (1.8 x °C) + 32

Then you have displayed in °F

Thank you for the response Karl........I assume I would have to edit that formula into the .ini file somewhere? I can't find any setup screens to do it...


Dave