Ecumaster forum

hi guys

i hope you all are fine.

i have here a bmw m3 s54b32 could someone please give exact information how to connect vanos to emu black ecu?i read a topic but is not clear.i have 6 cables for vanos.2 are black 2 are green and 2 are brown.can someone please give wiring specifications for emu black?

also for dbw how to connect to emu black?pps,main motor and two pontesiometers wiring.

i will be waiting for your response

best regards
btronic

no can help?

Contact Ecumaster Dealer near you. They will do it for you. You cant expekt, that someone will guide you trough whole proces of install and tuning your car. Its pretty normal to pay someone who will do it for you, because he knows what to do.

You can use EMU BLACK for controling 4 solenoids on your Double Vanos engine, gut there is too much current flowing trough the Throttle body motor, so you can control it directly without additional hardware.

you have 4 coils totally, 2 for inlet , 2 for exhaust side.
Each pair of solenoids (coils) are sharing one wire (ground in stock ecu) and this is why you dont see 8 wires, but just 6.

There are many ways how to do this task, and you must know why and what needs to be done, or you will not be able to understand how to tune it then.