Page 1 of 1
EMU BLACK ON Renault
Posted: Fri Jun 01, 2018 6:48 pm
by fabien _45
I have mount EMU Black on Renault, but i can't start engine, i don't know trigger Wheel setup
how know good setup ?
Thanks for your help
Fab
Re: EMU BLACK ON Renault
Posted: Sat Jun 02, 2018 7:28 pm
by Karel
If you knowledge is so bad like your post is.... there is no way to help you.
What model of Renault ? DO you have better photo then just 5 tooths of the flywheel ?
Re: EMU BLACK ON Renault
Posted: Sat Jun 02, 2018 9:14 pm
by fabien _45
Emu black was wired on Renault Clio 3 RS, flywheel is mount on engine , I haven’t photo, all latest Renault have the same flywheel 60 tooth, I have found this photo
Let me know
Thank for your help
Re: EMU BLACK ON Renault
Posted: Sun Jun 03, 2018 9:33 pm
by Karel
then this will be 60-2
Re: EMU BLACK ON Renault
Posted: Wed Jun 27, 2018 8:25 pm
by fabien _45
Hi,
thanks, now engine start Wheel but i can't read camsyn , here my trigger cams. read signal fail.
it's 12v hall sensor but internal pullup do it it with 5V ?
The attachment scope_2018627_203.rar is no longer available
Thanks for your help
Re: EMU BLACK ON Renault
Posted: Wed Jun 27, 2018 8:26 pm
by fabien _45