VW 16v ABF Trigger setup

[Racekid21]

Hey guys, it's me again

I want to run a Vw ABF 16V in full seqential mode non turbo, 9000 UPM. Crank trigger is 60-2. But what to do, to get a good signal of the cam position?
I've got a 4-window distributor, is it possible to get it running as secondary trigger? How?

Any other ideas to get a signal of the Cam position? I thought about triggering the cam wheel, is that possible, if I would mill one Teeth away ( just ahead of the Sensor, not a whole teeth).

Thanks a lot

[Jan32]

I made last year an 16V Turbo and cut 3 of the 4 teeth off. So then i had only one teeth and uses this as cam trigger.

[Racekid21]

Kannst du mir mal privat schreiben?

Thanks for the qiuck answer, any other ideas?

[TD-Motorsport Shop]

Hast du einen Verteiler vom 1.8 16V drin?ABF hat doch normalerweise nur ein Fenster

You use Distributor from 1.8 16V?

mfg
Daniel

[Jadzwin]

You can also remove just one tooth from the cam trigger wheel to get 4-1 pattern

[Racekid21]

It's a 4 window Dizzy.

I will remove 3 of 4 Flaps.

There are two types of ABF Dizzys...How ever it's a 4 window trigger.

Thanks alot

Vielen Dank