trigger request fiat 1.8..

All about our superior engine management unit.
Locked
ESRA Car performance
Posts:17
Joined:Tue Feb 23, 2016 1:51 pm
trigger request fiat 1.8..

Post by ESRA Car performance » Wed Feb 24, 2016 10:07 pm

Hi,

Im new in the EMU world.
tryring to get a fiat 1.8 16v to run..

just wire it in.
setting up the ecu now.

can some one please look at the trigger settings i shoul use?

cheers

the rotation is the wrong way on in the pic!...
Attachments
signals-table.jpg
signal.
CAS_fiat.jpg
cam trigger
crankshaft-trigger-wheel.jpg
crank trigger

ESRA Car performance
Posts:17
Joined:Tue Feb 23, 2016 1:51 pm

Re: trigger request fiat 1.8..

Post by ESRA Car performance » Sat Feb 27, 2016 11:25 pm

No one?

I was thinking...
2e tooth..
65 degrees.

roquete
Posts:108
Joined:Fri Apr 24, 2015 9:08 pm

Re: trigger request fiat 1.8..

Post by roquete » Sun Feb 28, 2016 2:31 am

that is a weird pattern, maybe the gurus from ecumaster will have another idea, but i would use a simple 36-1 or 60-2 trigger wheel.
cant you fit like a pulley from fiat punto 1.1? it already have a 60-2 trigger wheel on it

ESRA Car performance
Posts:17
Joined:Tue Feb 23, 2016 1:51 pm

Re: trigger request fiat 1.8..

Post by ESRA Car performance » Sun Feb 28, 2016 7:12 am

It's the same as a Subaru 6 tooth.
And that one is supported by the emu :)

Just need to know what to put in as the trigger

ESRA Car performance
Posts:17
Joined:Tue Feb 23, 2016 1:51 pm

Re: trigger request fiat 1.8..

Post by ESRA Car performance » Mon Feb 29, 2016 4:10 pm

No one else?

User avatar
Jadzwin
Site Admin
Posts:1445
Joined:Tue Aug 12, 2014 11:27 pm

Re: trigger request fiat 1.8..

Post by Jadzwin » Tue Mar 01, 2016 1:34 am

Is it Fiat Stilo ?

It looks the same as subaru.

So I would give a try the following settings:

Image

ESRA Car performance
Posts:17
Joined:Tue Feb 23, 2016 1:51 pm

Re: trigger request fiat 1.8..

Post by ESRA Car performance » Sat Mar 05, 2016 12:35 pm

car is a Barchetta


this is the scope i got now.
and the settings
Attachments
settings.jpg
scope_201635_1129.emuscp
(93Bytes)Downloaded 40 times

User avatar
Jadzwin
Site Admin
Posts:1445
Joined:Tue Aug 12, 2014 11:27 pm

Re: trigger request fiat 1.8..

Post by Jadzwin » Sat Mar 05, 2016 8:29 pm

Please try my settings. Should work. Of course check the spark with the timing lamp.

ESRA Car performance
Posts:17
Joined:Tue Feb 23, 2016 1:51 pm

Re: trigger request fiat 1.8..

Post by ESRA Car performance » Sun Mar 06, 2016 12:39 am

The car does not have timing marks.

Have to make my own.

ESRA Car performance
Posts:17
Joined:Tue Feb 23, 2016 1:51 pm

Re: trigger request fiat 1.8..

Post by ESRA Car performance » Sat Mar 19, 2016 10:07 am

I can not get her to fire up..

Timing is not in the same place every time.

Seems like its using a different start position?

ESRA Car performance
Posts:17
Joined:Tue Feb 23, 2016 1:51 pm

Re: trigger request fiat 1.8..

Post by ESRA Car performance » Sat Mar 19, 2016 10:09 am

Btw..

The rotation is the picture is the good way

ESRA Car performance
Posts:17
Joined:Tue Feb 23, 2016 1:51 pm

Re: trigger request fiat 1.8..

Post by ESRA Car performance » Sat Mar 19, 2016 11:20 am

this is the scope.

with the subaru 6 tooth settings i get a lot less triggers.
plus in the manual it say that it does not work with cam sinc..

so should i go group injection and wasted spark?
Attachments
6tooth.emuscp
(111Bytes)Downloaded 39 times
fiat scope.emuscp
(261Bytes)Downloaded 51 times

User avatar
Jadzwin
Site Admin
Posts:1445
Joined:Tue Aug 12, 2014 11:27 pm

Re: trigger request fiat 1.8..

Post by Jadzwin » Sat Mar 19, 2016 3:31 pm

The scope looks ok. This signal is converted to 2 tooth per revolution.

It works with cam sync. I sent you configuration.
You have to use cam sync otherwise it will not work.

ESRA Car performance
Posts:17
Joined:Tue Feb 23, 2016 1:51 pm

Re: trigger request fiat 1.8..

Post by ESRA Car performance » Sun Mar 20, 2016 10:53 am

Oke thanks.

Car is a
Fiat Barchetta
1.8 16v.
360cc injectors.
Turbo

Can you please send it to
R.akkermans@esra-carperformance.com

Thanks
:)

ESRA Car performance
Posts:17
Joined:Tue Feb 23, 2016 1:51 pm

Re: trigger request fiat 1.8..

Post by ESRA Car performance » Wed Mar 23, 2016 1:27 pm

Hello Sir.


Did you send the file already?

Desperate to try.

ESRA Car performance
Posts:17
Joined:Tue Feb 23, 2016 1:51 pm

Re: trigger request fiat 1.8..

Post by ESRA Car performance » Fri Mar 25, 2016 10:01 pm

Want o test it tomorrow morning.

Really need that file :(

Locked