rezistance box for low impirance injectors help

[ktsirigotakis]

Code: Select all

Hi to all

today i was traying to put some rezistors to my injectors due to they are low z 2Ω so i boght 4 8Ω 15w rezistors and i put them i series to the injectors line power 1 two rezistors and power 2 the other two. The car wont stat them removed th and the car was working i put one and and again nothing. So the car is working with total rezistance 4Ω per power out and i am in danger to burn my power out puts. Please advice me what to do with my problem?

Car: s13 200sx ca18det
Det3 400kpa fit mode
Thanks in advance

[Jadzwin]

Try just conect two injectors in series. The resistance will be 4 Ohm and it should work using 2 banks.

If you want use resistor to limit current use 3R3 or 4R7 per injector.

[eugen_troll]

Nissan s13 ca18det have alredy resistor box.
see small box on airfilter under afm.

[ktsirigotakis]

According to my measurments i have 4.4r per bank so if its ok i will leave it as it is. I have some wiring problems due to the age of the car if start spending to much time on i will spend time for new wiring with emu and problems will be solved

Oooo i didn't know that was a resistor box i have move it on the other side because i removed the afm and everything that they were there and i cut the afm wire

I have some problems with the clt i cant calibrate it!!!! Det3 goes out of limits

Thanks for you help