Lambda LSU 4.2

[PBU]

Hi

Is there no need for the calibration off the LSU ?
I read that after time the sensing element get's poluted ?

Is there intention to work with the LSU4.9, which is much better, in the future ?

Grts
Patrick

[Wuniek]

hi,

for that i know calibration of LSU is made on the start measuring RCAL resistance and putting this value into config
regarding LSU 4.9 I already ask this question and the answer was "due the hardware incompatibility it will not work"

[clamp]

what is OE bosh number for LSU 4.2? because i find only LSU 4.21

[Wuniek]

what is OE bosh number for LSU 4.2? because i find only LSU 4.21

for example : 0 258 007 351 this one is with longest connection cable that i found

and other examples visit : http://wbo2.com/lsu/

[astra vxr]

Bosch part number : 0258007057

long lead version

0258007351



Brand: Bosch
Part: Lambda Sensor
Reference: 0258007351

OEN Part Numbers
* AUDI: 06B 906 265 D
* AUDI: 07C 906 262 R
* AUDI: 1K0 998 262 D
* BENTLEY: 07C 906 262 AS
* BENTLEY: 07C 906 262 AT
* BENTLEY: 07C906262R
* ROLLS-ROYCE: 07C 906 262 AS
* ROLLS-ROYCE: 07C 906 262 AT
* SEAT: 06A 906 262 AN
* SEAT: 06A 906 262 BH
* SEAT: 077 906 262 A
* VW: 021 906 262 B
* VW: 022 906 262 D
* VW: 022 906 262 E
* VW: 022 906 262 H
* VW: 022 906 262 J
* VW: 06A 906 262 AF
* VW: 06A 906 262 AN
* VW: 06A 906 262 BC
* VW: 06A 906 262 BH
* VW: 06A 906 262 DK
* VW: 06B 906 265 D
* VW: 07C 906 262 AS
* VW: 07C 906 262 AT
* VW: 07C 906 262 K
* VW: 07C 906 262 N
* VW: 077 906 262
* VW: 077 906 262 A
* VW: 077 906 262 D
* VW: 077 906 262 E
* VW: 077 906 265 AB
* VW: 077 906 265 AC
* VW: 1K0 998 262 D

[clamp]

thx