.emu files

Support for EMU BLACK device
Locked
User avatar
alper
Posts:63
Joined:Sat Aug 16, 2014 1:33 am
Location:Antalya / Warsaw
.emu files

Post by alper » Sat Nov 26, 2016 9:59 pm

I imported a e.mu file and the car doesnt start EVEN all the necessary settings (fuel settings, tables, ignition settings, enrichment settings) are COMPLETELY imported fine.

the only problem with this is fuel is not enough. when I increase the fuel by around %30 - the car runs fine. but the upper parts of the table are incredibly rich.


so : should the car be re-tuned ? I checked all the settings about the fuel - all are the same.
-----------------------
Emu Distributor / Tuner

Karel
Posts:408
Joined:Wed Sep 10, 2014 11:58 am
Location:Czech Republic
Contact:

Re: .emu files

Post by Karel » Sat Nov 26, 2016 10:05 pm

may be, you have just wrong setting for injector death time

User avatar
alper
Posts:63
Joined:Sat Aug 16, 2014 1:33 am
Location:Antalya / Warsaw

Re: .emu files

Post by alper » Sat Nov 26, 2016 10:26 pm

it is imported %100 correct.
tested.
-----------------------
Emu Distributor / Tuner

Karel
Posts:408
Joined:Wed Sep 10, 2014 11:58 am
Location:Czech Republic
Contact:

Re: .emu files

Post by Karel » Sat Nov 26, 2016 11:35 pm

"Imported" from what to what ?

User avatar
alper
Posts:63
Joined:Sat Aug 16, 2014 1:33 am
Location:Antalya / Warsaw

Re: .emu files

Post by alper » Sun Nov 27, 2016 12:22 am

of course from emu to emu black
-----------------------
Emu Distributor / Tuner

PSI-Motor
Posts:455
Joined:Fri Aug 15, 2014 10:57 pm

Re: .emu files

Post by PSI-Motor » Sun Nov 27, 2016 1:31 am

BLACK uses advanced lambda VE calculation and you need to reset your Afr/lambda target.
EcuMaster Sweden

User avatar
alper
Posts:63
Joined:Sat Aug 16, 2014 1:33 am
Location:Antalya / Warsaw

Re: .emu files

Post by alper » Sun Nov 27, 2016 8:29 am

although i dont use ego feedback ?
-----------------------
Emu Distributor / Tuner

Karel
Posts:408
Joined:Wed Sep 10, 2014 11:58 am
Location:Czech Republic
Contact:

Re: .emu files

Post by Karel » Sun Nov 27, 2016 10:31 am

Yes, it uses the lambda target table for the calculation.

Lest say your VE will be 100% at 10ms injection. If you put lambda 1 it will stay at 10ms and hold mixture at Lambda 1. If you select lambda 0,8 it will add more fuel to achieve your goal.

PSI-Motor
Posts:455
Joined:Fri Aug 15, 2014 10:57 pm

Re: .emu files

Post by PSI-Motor » Sun Nov 27, 2016 6:34 pm

alper wrote:although i dont use ego feedback ?
Of course, its like all ecu:s with "true" VE calculation.....
EcuMaster Sweden

Locked