.emu files

[alper]

I imported a e.mu file and the car doesnt start EVEN all the necessary settings (fuel settings, tables, ignition settings, enrichment settings) are COMPLETELY imported fine.

the only problem with this is fuel is not enough. when I increase the fuel by around %30 - the car runs fine. but the upper parts of the table are incredibly rich.


so : should the car be re-tuned ? I checked all the settings about the fuel - all are the same.

[Karel]

may be, you have just wrong setting for injector death time

[alper]

it is imported %100 correct.
tested.

[Karel]

"Imported" from what to what ?

[alper]

of course from emu to emu black

[PSI-Motor]

BLACK uses advanced lambda VE calculation and you need to reset your Afr/lambda target.

[alper]

although i dont use ego feedback ?

[Karel]

Yes, it uses the lambda target table for the calculation.

Lest say your VE will be 100% at 10ms injection. If you put lambda 1 it will stay at 10ms and hold mixture at Lambda 1. If you select lambda 0,8 it will add more fuel to achieve your goal.

[PSI-Motor]

although i dont use ego feedback ?

Of course, its like all ecu:s with "true" VE calculation.....