base map Mitsubishi Galant 4g64

wencel · Post by **wencel** » Fri Mar 17, 2017 12:39 pm

Hello,

Can someone share base map for Mitsubishi 4g64 2002 ? There are problems with the parameters Primary trigger and Secondary trigger
Thanks
Now we have

roquete · Post by **roquete** » Fri Mar 17, 2017 4:57 pm

search here:
viewtopic.php?f=19&t=514&p=3515&hilit=evo3#p3464

wencel · Post by **wencel** » Mon Mar 20, 2017 3:40 pm

roquete wrote:search here:
viewtopic.php?f=19&t=514&p=3515&hilit=evo3#p3464

Now as in the maps from the evo, but the car does not work. Evo, two camshafts, 4g64 one camshafts. How to choose the right second trigger?

roquete · Post by **roquete** » Mon Mar 20, 2017 5:29 pm

4g64 may have SOHC or DOHC, which sensor do you have?
CAS module on the camshaft or crank and cam sensors separated?

wencel · Post by **wencel** » Mon Mar 20, 2017 5:33 pm

roquete wrote:4g64 may have SOHC or DOHC, which sensor do you have?
CAS module on the camshaft or crank and cam sensors separated?

I have SOHC
two sensors, crank and cam sensors separated

roquete · Post by **roquete** » Mon Mar 20, 2017 5:59 pm

sorry now i see you have already wired them up.
Just use the scope function of the software and post it here.

wencel · Post by **wencel** » Mon Mar 20, 2017 6:03 pm

roquete wrote:sorry now i see you have already wired them up.
Just use the scope function of the software and post it here.

Here I saved

roquete · Post by **roquete** » Mon Mar 20, 2017 6:08 pm

why are you using cam#2?
post your project file, and how many thooth does the primary trigger have?

wencel · Post by **wencel** » Tue Mar 21, 2017 10:15 am

roquete wrote:why are you using cam#2?
post your project file, and how many thooth does the primary trigger have?

Very strange, once showed it, I saved it.
I will attach another file later.

roquete · Post by **roquete** » Tue Mar 21, 2017 11:05 pm

you have the same settings i have for a evo3 with cas on camshaft like this:

: evo3cas.jpg (7.67KiB)Viewed 2444 times

these are my settings:

if your trigger on crankshaft is only 2 teeth like this settings are ok maybie you need to enable pullup

: 4g6tigger.jpg (3.75KiB)Viewed 2444 times

Ecumaster forum

base map Mitsubishi Galant 4g64

Re: base map Mitsubishi Galant 4g64

Re: base map Mitsubishi Galant 4g64

Re: base map Mitsubishi Galant 4g64

Re: base map Mitsubishi Galant 4g64

Re: base map Mitsubishi Galant 4g64

Re: base map Mitsubishi Galant 4g64

Re: base map Mitsubishi Galant 4g64

Re: base map Mitsubishi Galant 4g64

Re: base map Mitsubishi Galant 4g64