Nissan RB30ET 6 cylinder single coil

markturbo · Post by **markturbo** » Fri Aug 04, 2017 10:47 am

Hello felow ECU master's,
I Just wired in an EMU to a Holden VL Commodore with an RB30ET.
1 x stock coil with ignitor.
6 x low impedance injectors 2.4ohm 440cc R32 GTR
1 x wideband

Ive done the trigger settings myself, not sure if correct. Timing seems stable.
The injector phase looks correct to me. Firing order 153624
Not sure if these EMU's do low impedance injectors either, ive wired 6 x 2.4ohm injectors with no resistors.

Any feedback would be appreciated

MRC_002.emu: rb30et; (101.86KiB)Downloaded 81 times

.

Thanks everyone.