RX8 CAN vehicle speed info

[hIGGI]

Hi

With Karel we have wired EMU Black to my rotary powered RX8, running with 0 split so far.
DBW works
CAN gauges works
Electric PowerSteering seems to work ok too

however , i have ABS and TCS light on and no speed info on gauges
In Sensor setup, i tried pretty much anything, as speed source i have CAN wheel speed and in log (VSS and gears) i have working wheel speed sensors (value is changing when car is moving), but no changes to Vehicle speed.

Any ideas?

thanks

hIGGI

[Jadzwin]

Do you have any tool to scan CAN BUS ?

[hIGGI]

i am away, will try autocom scantool when i get back

[hIGGI]

EMU black now on 2.046 firmware, still no ABS and TCS

Speed in EMU software and on gauge cluster works, powersteering seems to be working too.

ABS unit error codes :
C1805
AND
U1900

[tomaszc]

Hi, I also have an RX8 and have the Ecumaster EMU (not Black) on firmware 1,188 with the exact same problem. ABS not working and throwing C1805 and U1900. I wrote to tech support about it yesterday.

[A.Dutsov]

any update here?

[hIGGI]

none that i know of and last info from tomaszc was same......

[Japac]

What settings did you use ? Just tryed to get my rx8 to work but dash is not working, also the black is showing can fault.