Ford Duratec with Coilpack

[AdamQ]

Hello,

I'm just seeking confirmation really. I'm using the ECU on a 2.0 Ford Duratec engine with the coilpack mounted at the rear of the head. It's a wasted spark system. The coilpack has three inputs: ignition driver 1, +12V feed, and ignition driver 2.

Can anyone confirm the settings and entries for the Ignition outputs - in particular 'Coils type' and 'Ignition events' 1 and 2?

Many thanks,

Adam

[Karel]

The middle will be the 12V source, and pins 1 and 3 will be connected to ECU ignitior outputs 1 and 2. The firring order will be 1,2,1,2... you will runn in wasted spark mode..... so simple is it. And it is a Coil without amplifier

[AdamQ]

Hi Karel,

Perfect - thank you very much indeed.

Regards,
Adam