How to set up a basic fuel map?
How do I go about setting up a basic fuel map for running my 2nd injector on my custom built 1.1 punto turbo, started entering numbers to see what's what but I'm running rich, so what would be the best wat to start on makeing a basic fuel map?
-
BGTMIDGET7476
- Posts:7
- Joined:Tue Dec 09, 2014 12:37 pm
Re: How to set up a basic fuel map?
Hi Mate
As usual with these thing I always feel like people don't want to give too much info.
However lets see if I can help, I'm new to the DET3 but have manged to get it running on a Stock engine and supercharged just fine.
First of all, do you have a Wideband sensor and wired to the DET or at least Gauge for this in the car? If not, get one this will allow you to see the Air Fuel Ratio in realtime.
As usual with these thing I always feel like people don't want to give too much info.
However lets see if I can help, I'm new to the DET3 but have manged to get it running on a Stock engine and supercharged just fine.
First of all, do you have a Wideband sensor and wired to the DET or at least Gauge for this in the car? If not, get one this will allow you to see the Air Fuel Ratio in realtime.