ECUMASTER products based projects
-
alper
- Posts:63
- Joined:Sat Aug 16, 2014 1:33 am
- Location:Antalya / Warsaw
Post
by alper » Wed Mar 04, 2015 9:09 am
The project has been revised.
photos coming soon.
additions are :
custom intake manifold
custom turbo manifold
Newman Cams + adjustable cam gears
bigger turbo with billet wheel
-----------------------
Emu Distributor / Tuner
-
samvel - Posts:256
- Joined:Fri Aug 15, 2014 9:44 pm
- Location:Tallinn, Estonia
-
Contact:
Post
by samvel » Wed Mar 04, 2015 10:53 pm
How good those VAG red COPs fit this engine?
I am going to try Bosch P65 coils on customer Cosworth.
www.esracing.ee / www.facebook.com/esracingestonia
-
Jadzwin
- Site Admin
- Posts:1445
- Joined:Tue Aug 12, 2014 11:27 pm
Post
by Jadzwin » Thu Mar 05, 2015 4:27 pm
Personally I would install P65. It is much better coil in aspects of spark energy and reliability
-
samvel - Posts:256
- Joined:Fri Aug 15, 2014 9:44 pm
- Location:Tallinn, Estonia
-
Contact:
Post
by samvel » Thu Mar 05, 2015 6:05 pm
I will try them Jakub. Just never used them before and seems to fit this engine.
They are listed as Bosch Motorsport coils with good energy yes and should be also oem fitment on Fiat/Alfa/Lancia 1.4/1.8.
www.esracing.ee / www.facebook.com/esracingestonia
-
alper
- Posts:63
- Joined:Sat Aug 16, 2014 1:33 am
- Location:Antalya / Warsaw
Post
by alper » Sat Mar 07, 2015 2:27 am
we never had any problems with the red coils.
and I think noone sells p65s here in Turkey.
I'll check them, though..
-----------------------
Emu Distributor / Tuner
-
xmaniekx - Posts:14
- Joined:Sun Feb 08, 2015 4:42 pm
Post
by xmaniekx » Sat Mar 07, 2015 11:14 am
Are you checking your EGT on individual cylinders? I am designing dual plenum manifold for Cosworth YB right now and EGTs on each cylinders vs. boost are interesting for me.
Cheers,
Mariusz
-
alper
- Posts:63
- Joined:Sat Aug 16, 2014 1:33 am
- Location:Antalya / Warsaw
Post
by alper » Sun Mar 08, 2015 2:28 am
well, no I dont check EGT on individual cylinders.
I just listen to knock and that's all.
-----------------------
Emu Distributor / Tuner
-
samvel - Posts:256
- Joined:Fri Aug 15, 2014 9:44 pm
- Location:Tallinn, Estonia
-
Contact:
Post
by samvel » Thu May 07, 2015 10:17 pm
Hi. Is it tacho working directly from EMU tacho output on Cossie?
www.esracing.ee / www.facebook.com/esracingestonia
-
alper
- Posts:63
- Joined:Sat Aug 16, 2014 1:33 am
- Location:Antalya / Warsaw
Post
by alper » Mon May 11, 2015 11:18 pm
we have an Autometer Tacho

-----------------------
Emu Distributor / Tuner
-
shadowlandz - Posts:20
- Joined:Wed Jun 10, 2015 12:41 am
Post
by shadowlandz » Wed Jun 10, 2015 12:48 am
Nice project!!
I have the EMU also on my escort cosworth and the tacho is not working..
-
samvel - Posts:256
- Joined:Fri Aug 15, 2014 9:44 pm
- Location:Tallinn, Estonia
-
Contact:
Post
by samvel » Wed Jun 10, 2015 1:06 pm
On my customer Sierra Cosw oem tacho works directly from EMU. Tacho needle spikes little when ign on/ engine stopped though.
www.esracing.ee / www.facebook.com/esracingestonia