Hi.
Finally I did first test drives with my M50 Turbo swap.
Everything seems to be fine, but at more than 4000rpm I get missfire or something.
I made a log with rpm, trigger sync status and cam sync trigger tooth.
cam tooth jumps suddenly from 118 down to 51.
Is this the reason? and how to fix it?
too much noise?
Scope shows no errors
Missfire at higher RPMs
Re: Missfire at higher RPMs
hi.
i set 700° crank angle to ignore the cam trigger.
maybe theres still noise, but i do not recognize it
i set 700° crank angle to ignore the cam trigger.
maybe theres still noise, but i do not recognize it

Re: Missfire at higher RPMs
Please attach the log file