Coils for V12

[BigMac]

Hello
I want to use an EMU to run a Jaguar V12 and as the ECU only has 6 channels for ignition is it possible to trigger two coils from one channel ?
Obviously there are current limits when using the internal drivers so I guess using coil packs with inbuilt drivers is best
Thanks

[RHD]

if you use a twin fire type of coil should be fine

something like these below, lots of little cars use this type as an oem coil, older Hyundai etc

otherwise LS1 coils are good and reliable with built in igniters so can run as many as you want of one driver.

[Jadzwin]

Customers that connect EMU to V8 BMW connects 2 passive coils to one ignition output and everything works great.

So if your OEM coils are passive I would follow this solution.

[BigMac]

I thought it might be OK to wire 2 coils . i was thinking about using a VR6 coil pack with built in amps
Seems a bit bulky but the connector looks like a regular minitimer 5 way. Any other OEM coils out there like this ?


Thanks

[Karel]

http://www.bosch-motorsport.de/de/de/pr ... 230315.php


Feature icons
•Max. 35 kV
•Max. 65 mJ
•Max. 1.9 kV/µs
•For 6 cyl. engines

Description
This dual spark ignition coil is designed for low-cost applications in 6-cylinder engines.

You can use two of them, and it will be fine.


An also you can use :

http://www.bosch-motorsport.de/de/de/pr ... 230275.php


Feature icons
•Max. 35 kV
•Max. 65 mJ
•Developed for GDI engines
•Max. 10,000 1/min

Description
This single fire coil is a low cost concept designed for direct mounting to the cylinder-head.

You can trigger two of them from EMU without problem.