2jzgte vvti setup
-
- Posts:34
- Joined:Fri May 29, 2015 4:34 am
I just received my EMU standalone today and was wondering if I can get some wiring tips and maybe a base map. I'm running a precision 6776 @ 1bar on stock head with id1000 injectors. I'm using the jzx100 r154 5speed trans. Also plan to use a Bosch LSU 4.9 wideband. And I have a apexi boost control solenoid valve I was planning to use.
Re: 2jzgte vvti setup
LSU 4.9 wideband will not work with EMU without external controller you must look for LSU 4.2 http://www.bosch-motorsport.de/media/ca ... 435pdf.pdf
SPECIFICATION
Lambda sensors
- narrow band 4 wires sensor,
- wide-band sensor Bosch LSU 4.2
-
- Posts:34
- Joined:Fri May 29, 2015 4:34 am
Re: 2jzgte vvti setup
The wideband I have is for a gauge set up already. It has a controller box and is set up for data logging http://www.glowshift.com/instructions/7 ... atalog.pdf
Re: 2jzgte vvti setup
there was few topics about this engine
i think for start this will be helpful :
your controller has 0-5 output so there will be no problem to connect it to EMU
i think for start this will be helpful :
and later check other topics search.php?keywords=2jzgteJadzwin wrote:
Hi!
For 2JZ VVTi we changed the CAM decoder to improve engine start.
Here is a document how to setup trigger and VVTI
https://dl.dropboxusercontent.com/u/286 ... e_vvti.pdf
your controller has 0-5 output so there will be no problem to connect it to EMU
aaronRX72JZ wrote:The wideband I have is for a gauge set up already. It has a controller box and is set up for data logging http://www.glowshift.com/instructions/7 ... atalog.pdf
-
- Posts:34
- Joined:Fri May 29, 2015 4:34 am
Re: 2jzgte vvti setup
I also bought the IAT sensor kit from your website and was wondering what sensor it is in the IAT wizard? Also setting up the wiring for my TPS I'm using the factory vvti one. It has 4 pins. Looking at the wiring diagram I can see what wire is +5v and sensor ground, but which is the signal wire and what do I do with the other wire? Also what size fly back diode should I use for the vvti oil control valve?
Re: 2jzgte vvti setup
If you want i can write down what we connected to our 2jz vvti 
Can you see the partnumber on your tps?

Can you see the partnumber on your tps?
Flemming Rosborg
RiiS DRiFT
Follow on Facebook! facebook.com/riisdrift
RiiS DRiFT
Follow on Facebook! facebook.com/riisdrift
-
- Posts:34
- Joined:Fri May 29, 2015 4:34 am
Re: 2jzgte vvti setup
yes. That would be great if you can do that! im running the factory TPS sensor Toyota PN# 89452-30150. and any idea on the IAT sensor? it definitely looks like a GM IAT sensor but there are 2 on the sensor wizard i dont know which one it is?
-
- Posts:34
- Joined:Fri May 29, 2015 4:34 am
Re: 2jzgte vvti setup
knock sensor setup: does anyone know the correct perimeters for the stock 2jz knock sensors?
Re: 2jzgte vvti setup
Im also interested in the parameters as ill be installing my engine soon 
