1uzfe wiring problem

All about our superior engine management unit.
Locked
lucasc
Posts:6
Joined:Tue May 05, 2015 1:56 pm
1uzfe wiring problem

Post by lucasc » Fri Jul 31, 2015 5:53 pm

hello everybody!

i just wired up an 1uzfe to the emu but i am not getting a crank or cam signal. i did the 2k2 resistor on the 5v circuit to the signal side of the sensor.
anyone any thought?

Karel
Posts:408
Joined:Wed Sep 10, 2014 11:58 am
Location:Czech Republic
Contact:

Re: 1uzfe wiring problem

Post by Karel » Fri Jul 31, 2015 7:32 pm

lucasc wrote:hello everybody!

i just wired up an 1uzfe to the emu but i am not getting a crank or cam signal. i did the 2k2 resistor on the 5v circuit to the signal side of the sensor.
anyone any thought?
Why the extra resistor ?

Is not 1UZ using normal magnetic sensor on crank ?

lucasc
Posts:6
Joined:Tue May 05, 2015 1:56 pm

Re: 1uzfe wiring problem

Post by lucasc » Sat Aug 01, 2015 3:51 pm

i have tried without and changed the settings accordingly.
does anybody have a wiring schematic for a 1uzfe?

Karel
Posts:408
Joined:Wed Sep 10, 2014 11:58 am
Location:Czech Republic
Contact:

Re: 1uzfe wiring problem

Post by Karel » Sat Aug 01, 2015 7:32 pm

wirring schematics? For what ? You mean OEM wirring ?

put the mag sensor on pin for sensor ground and primary trigger, cam sensor on secondary trigger, TPS one on sensor ground, second on TPS input and the third to +5V, conntect your injectors on one side to switched 12V and the other end on EMU outputs for injectors etc..............

So what do you need ? It easy, liek every other engine

lucasc
Posts:6
Joined:Tue May 05, 2015 1:56 pm

Re: 1uzfe wiring problem

Post by lucasc » Sun Aug 02, 2015 3:28 pm

i did that.... this is why i came tot he forum for help! i have tried switching wires for signal to ground and vica versa... no result.
i know it should be dead easy but somehow i am missing something.
checked the sensors and they are still good on the bench

User avatar
Jadzwin
Site Admin
Posts:1445
Joined:Tue Aug 12, 2014 11:27 pm

Re: 1uzfe wiring problem

Post by Jadzwin » Tue Aug 04, 2015 11:07 pm

did you solve the problem ?

User avatar
Kisielisodd
ECUMASTER TEAM
Posts:227
Joined:Fri Aug 15, 2014 9:49 pm

Re: 1uzfe wiring problem

Post by Kisielisodd » Wed Aug 05, 2015 10:48 am

lucasc wrote: does anybody have a wiring schematic for a 1uzfe?
http://lmgtfy.com/?q=1uzfe+wiring+diagram

first link

lucasc
Posts:6
Joined:Tue May 05, 2015 1:56 pm

Re: 1uzfe wiring problem

Post by lucasc » Wed Aug 05, 2015 12:11 pm

no problem is still there unfortunatly.

User avatar
Jadzwin
Site Admin
Posts:1445
Joined:Tue Aug 12, 2014 11:27 pm

Re: 1uzfe wiring problem

Post by Jadzwin » Wed Aug 05, 2015 12:30 pm

Please write an email to tech@ecumaster.com

lucasc
Posts:6
Joined:Tue May 05, 2015 1:56 pm

Re: 1uzfe wiring problem

Post by lucasc » Thu Aug 06, 2015 9:45 pm

problem is solved!

packall
Posts:7
Joined:Wed Nov 26, 2014 4:56 pm

Re: 1uzfe wiring problem

Post by packall » Sun Aug 30, 2015 2:20 pm

Im now solving almost the same problem ( custom wiring, shielded ) but no crankshaft signal, and no camsfaht signal ( Im using cam on the drivers side ).
Can you please wrote what was teh problem? maybe I have the same ( 1UZ FE 89 - UCF10 ).

Locked