two lambda inputs

All about our superior engine management unit.
Locked
shrek69
Posts:58
Joined:Mon Aug 03, 2015 11:52 pm
Location:Germany
two lambda inputs

Post by shrek69 » Sun Aug 16, 2015 6:24 pm

i have some questions

1. two lambda inputs for bank selective fuel contoll are possible?

2. is a new standalone ecu in development?(dbw included)

3. Bmw M3 S14 has two sensors on the crank, must a cam sensor installed or can the "crank-tdc-sensor" used for syncronisation ?

4. where to buy a pnp solution for usb logging.

Karel
Posts:408
Joined:Wed Sep 10, 2014 11:58 am
Location:Czech Republic
Contact:

Re: two lambda inputs

Post by Karel » Mon Aug 17, 2015 11:10 am

shrek69 wrote:i have some questions

3. Bmw M3 S14 has two sensors on the crank, must a cam sensor installed or can the "crank-tdc-sensor" used for syncronisation ?

If you have TDC mark on crank, you know the 1st piston TDC, but you will not know if this is the working cycle or the exhaust cycle. The cam rotation is 2 time slower than crank. So if you have TDC mark on CAM, you can tell when should you cpark and inject.

............... but , you can still run waste spark + pair injection and use just crank sensor for timing.

User avatar
Kisielisodd
ECUMASTER TEAM
Posts:227
Joined:Fri Aug 15, 2014 9:49 pm

Re: two lambda inputs

Post by Kisielisodd » Mon Aug 17, 2015 3:44 pm

1) it's not possible

2) Yes it is

3) BMW's s13 engine has distributor so it doesn't need CAM sensor for sequential ignition. Fuel is probably connected in pairs .

4) We are working on it.

shrek69
Posts:58
Joined:Mon Aug 03, 2015 11:52 pm
Location:Germany

Re: two lambda inputs

Post by shrek69 » Mon Aug 17, 2015 4:32 pm

cool

so new ecu will have two bank o2 control and dbw

for building an pnp adapter for bmw S14 engine , is it possible to buy emu-ecu-connector for soldering on a circuitboard?

User avatar
Kisielisodd
ECUMASTER TEAM
Posts:227
Joined:Fri Aug 15, 2014 9:49 pm

Re: two lambda inputs

Post by Kisielisodd » Mon Aug 17, 2015 7:23 pm

With us everything is possible. Write email to Piotr at sales@ecumaster.com

Locked