C20XE idle control valve propper configuration

[clamp]

hi ,
i have problem with propper configuration with this idle valve . My car is C20Xe turbo but i have high idle and unstable. I use 72mm throttle body.
my idle target rpm is 1100 but my idle is 1200-1300. this idle control valve have reaction only with idle ref table !

p.s i upload my Log with start, cranking and idle test

[PSI-Motor]

You have to tune idle ref before activating PID.
Many people sometimes blame the idlevalve when its actually the ignition table and fueltable thats the problem.

[RHD]

also find what frequency is correct for your valve... many bosch idle valve need about 100Hz

[clamp]

i try with 100 with 60 but idle valve is more unstable

[derOJ]

Did you install a flyback diode?

[clamp]

yes but this flyback diode is for other things.
today i see new .. my idle max parametar was set to 2500rpm when i set to 1500 my idle from 1300rpm was icrease to 2100 rpm..(with this settings)
tomorrow i will try new settings with max idle 1500rpm